info@nationalfireltd.co.uk        Call us: 01926 754 150 or 0203 4888 444

A trusted partner to the UK’s best companies

What is an Intumescent Coating?

What is an Intumescent Coating?

The process of
intumescence in the context of fire protection is when active components in a
coating swell when heated. This produces an insulating char which provides
protection to the surface to which the coating is applied. 

Generally, intumescent
coatings can swell to between 5 and 50 times their original applied thickness.
This swelling froms a charred layer, which can be light in density through to a
solid, dense form.  Whatever its appearance and integrity, the char will
insulate the underlying steel substrate from the rapid temperature increase
that would otherwise occur in a fire. 
The intumescent layer
extends the load-bearing capacity of the steel structure and the time for which
it protects the building from collapse. However, this is also dependent on the
thickness of the coating and insulation properties of the char produced from

it. In general, most fire resistance periods required to meet UK building
regulations can be achieved using this type of technology.

 

Intumescent Coating System

An intumescent coating
system comprises of a primer, basecoat and sealant (or top or decorative coat).
In some environments, and with the approval of the intumescent manufacturer,
the sealer may be omitted from the system.

Primer: A protective coating, usually anti-corrosive, applied to
the substrate prior to application of the basecoat. 

Basecoat: An intumescent coating, which reacts to heat by swelling
in a controlled manner to many times its original thickness. It produces a layer
of char which acts as an insulating layer to protect the substrate. The
basecoat can be a thick film or thin film. In fact, this denotes the type of
coating system i.e. thick film coating system or thin film coating system).

Sealer
Coat or Top Coat:
 A coating
applied over the basecoat to prevent the basecoat from environmental
degradation.

Decorative
Coat:
 A
coating applied over the basecoat for decorative purpose only. It could also
act as a Sealer or Top Coat.

 If you are looking for fire door installation assistance please check out our installation page here or you can find our fire door maintenance page here

For our Fire firestopping services please visit here

Brochure Download

For more info on our passive fire protection services, enter your details below and & we will send you a brochure direct to your inbox.