The Nature of Fire in Buildings
National Fire Ltd specialize in Fire door maintenance & Fire door installations, we are both a Fire door maintenance contractor and a Fire door installation contractor.
If you are responsible for a workplace or building to which the public have access to, you can prevent fires by taking responsibility for and adopting the right measures and procedures by understanding the nature of fire in Buildings.
Fires need three things to start. Firstly, a source of ignition (heat), secondly a source of fuel (something that burns) and finally oxygen. Once ignition occurs and a fire starts, it can spread very quickly. Depending on the environment, a fire can get out of control in 30 seconds or less if flammable materials and substances are in the vicinity.
Within 1 minute smoke can fill a room. After 3 minutes, the temperature can reach over 300 degrees and will spread to other rooms within the building. When the fire has been burning for around 5 minutes, the heat from the source of the fire will begin to ignite the remaining combustible materials surrounding it. Once they reach their fire points, they will also ignite. This is called a ‘flashover’.
During the phase which follows a flashover, flames burn throughout the enclosed area. This is when the highest temperatures of the fire spread are reached. At this point, the condition and quality of the passive and intumescent fire protection elements within the building are tested.
Suppressing Fire Spread
Many buildings have sufficient active fire protection in place such as fire alarms, sprinkler systems and fire extinguishers etc. However, many businesses and building occupants can overlook or are not aware of the importance of passive fire protection.
Passive Fire protection can be installed in many ways depending on the building and the application but can include cavity fire barriers or full fire compartmentation.
We also offer external cavity fire barriers.
Both active and passive fire systems should be in place. When working together, they increase the chance of suppressing fires, the length of time occupants have to escape and minimise damage to buildings.
Make sure your building is adequately protected in case of the risk of fire spread.
A great please to look for more information on this subject is visiting the Health & Safety Executive’s website here.
Ensure fire risk assessments are up-to-date and make sure to have a compliance survey carried out. Click here to find out about our passive fire protection surveys or request a site visit.
Brochure Download
For more info on our passive fire protection services, enter your details below and & we will send you a brochure direct to your inbox.